Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - norman

Pages: 1 ... 10 11 [12] 13 14 ... 19
166
Windows / Windows 10 Creators Edition
« on: April 11, 2017, 06:49:02 pm »
This is likely to give a few headaches for the unaware.

It is a good time to check that all your drivers are up to date!

Norman
 ;)

167
You may get an error message and the program stops. It may occur immediately after installing a new version of the program or you log onto Windows as a different user.

It's due to security in Windows and means that the program was previously installed under a particular user and that's not you!

There are two solutions :-

1. De-install Sameday Express. Browse to C:\ProgramData\ZiPZAP Computers Limited\ and delete the SAMEDAY EXPRESS folder you find here. You may need to authorise it as ADMINISTRATOR.

Re-install Sameday Express.

You will have to go into Setup/Local Parameters and complete this again.

OR (and probably easier)

2. Go into My Computer then Local Disk C: and the folder ProgramData (not Program Files) and you will find a directory called ZiPZAP Computers Limited.

Enter this directory and you will see a folder called SAMEDAY EXPRESS. Right-click on this and choose PROPERTIES.

Click on the SECURITY tab. Half way down you will see a button that says EDIT. Click this.

You will get a new screen with a list of users. Click on the ADD button.

Add a user called Everyone

Hit the CHECK button. It will be accepted. Click on Everyone in the table. Put a tick in Full Control at the bottom and hit the APPLY button.

Now OK and come out. You can now access the system as another user.

Norman
 ;)

168
Miscellaneous / Malwarebytes - IObit - feud? 16/03/2017
« on: March 17, 2017, 02:29:17 pm »
Malwarebytes is reporting ALL of IObit Advanced Systemcare as a PUP this morning and blocking it! Over 1000 files were reported as PUPs this morning and they were placed in Quarantine.

There seems to be some kind of politics going on between Malwarebytes and IObit over copyright which may explain it. This is explained on the Malwarebytes site.

IOBit say you should alter PUP detection in Malwarebytes to IGNORE.

Norman
 ;)

169
Operational Status / Site down for short time - 17/03/2017
« on: March 17, 2017, 02:23:24 pm »
The web site went down around 9.30am this morning for about half an hour. ISP Issue.

All now resolved.

Norman
 ;)

170
Miscellaneous / Microsoft having issues - 07/03/2017
« on: March 08, 2017, 05:12:41 pm »
Microsoft have been experiencing Authentication issues meaning that it has been a problem logging into Hotmail, Outlook, Skype etc.

Norman
 ;)

171
Loadmaster / Loadmaster update 43.1.81.0 - 08/03/2017
« on: March 08, 2017, 05:10:02 pm »
Big update on the emailing customers side.

You can now bulk email the customers with or without a file attached (txt, doc, docx or pdf i.e. 'safe' files) by either SMTP or Outlook and with or without data logging the emails.

Issues are marked as *PROBLEM* in the email log.

Norman
 ;)

172
Sameday Express / Sameday Express now on version 2.59 - 06/03/2017
« on: March 06, 2017, 04:36:13 pm »
Updated emailing to work under SMTP, Outlook and MAPI.

This alleviates an issue where Microsoft Office has an issue with SMTP and no longer sends emails.

The program is capable of multi-company use from v.2.58

Norman
 ;)

173
Loadmaster / Loadmaster - cannot log on. Screen closes.
« on: March 06, 2017, 09:54:13 am »
It means your username and password are invalid.

If you are sure that you got these right then the chances are that you are working on a network with the data on a remote drive and it is no longer accessible. It may come up and ask if you want to use the local drive instead and you have OKed this.

Log on as MANAGER with a password of BORG. Are you in the table? If not then CREATE/NEW a new one. Now log in as this user. Check the data directory on the bottom line. If this is wrong then go to UTILITIES and DATA DIRECTORY then browse for the correct one. Save.

You should now be on the system again.

Norman
 ;)

174
Sameday Express / Sameday screen closes immediately after trying login
« on: March 06, 2017, 09:53:25 am »
It means you haven't logged on! It doesn't recognise your username and password.

If you are sure that you got these right then the chances are that you are working on a network with the data on a remote drive and it is no longer accessible. It may come up and ask if you want to use the local drive instead and you have OKed this.

Log on as MANAGER with a password of BORG. Are you in the table? If not then CREATE/NEW a new one. Now log in as this user. Check the data directory on the bottom line. If this is wrong then go to UTILITIES and DATA DIRECTORY then browse for the correct one. Save.

You should now be on the system again.

Norman
 ;)

175
Operational Status / All OK - 02/03/2017
« on: March 02, 2017, 09:58:54 am »
All systems operational.

Please note that if you want to post to this board then you must be an existing customer. Just let us know by email.

The reason for this is that the board was getting over 1000 applications per day (mainly from Russia) and it was clear that the intention of these people was for simple misuse.

Norman
 ;)

176
Loadmaster / Differences between Loadmaster Enterprise and Extreme
« on: March 02, 2017, 09:42:10 am »
There are two different folders on the web site of Loadmaster Enterprise and Loadmaster Extreme.

Loadmaster Enterprise contains the normal setup of Loadmaster.

Loadmaster Extreme contains the AUTOLOADER version.

What's the difference? The AUTOLOADER version is not updated as often. It is updated only when major changes occur. This is to stop the end user being bombarded with update notifications.

The AUTOLOADER version of the program on your desktop will automatically update when it detects a new version.

To work with the AUTOLOADER version simply install from the Loadmaster Extreme directory.

To stop working with the AUTOLOADER version simply locate the file WDUPDATE.NET which will either be in the program directory or C:\Program Data\ZiPZAP Computers\Loadmaster and delete it.

Norman
 ;)

177
Loadmaster / Installer password change 27/02/2017
« on: February 28, 2017, 10:03:59 am »
The installation password for Loadmaster has changed.

This is to ensure that only authorised sites download and install the program.

Norman
 ;)

178
TPN Invoicing / Installer password change 27/02/2017
« on: February 28, 2017, 10:03:18 am »
The installation password for TPN SOAP WEB has changed.

This is to ensure that only authorised sites download and install the program.

Norman
 ;)

179
TPN Invoicing / TPN SOAP WEB 2.92
« on: February 28, 2017, 09:58:11 am »
There is a second installer for TPN SOAP WEB in a folder called ReducedRightsVersion which has a lower Windows 'rights' requirement and which may help if you are having security lockdown issues.

Please note that if you have already installed TPN SOAP before then you will have to remove the folder TPNSOAP which is found in the hidden folder C:\ProgramData\ZiPZAP Computers Limited\ before you install otherwise you will get a security error when the program is run. Again, this is down to Windows security restrictions.

Please note the installation password has changed. Email a request for the new one.

Norman
 ;)

180
Loadmaster / Loadmaster updates - 43.1.79.0 - 27/02/2017
« on: February 28, 2017, 09:50:00 am »
Following a large amount of updating this version is released today.

Extensive work has been down on POD images with a massive increase in image quality. PODs can be emailed directly to the customer, either singly or all of those for an invoice. PODs can be imported from a directory and matched on Job Number, TPN Number or visibly.

A whole section for Pickups has been introduced complete with a real-time display option.

Emailing has been updated to allow use by SMTP (standard method), Outlook or MAPI.

Norman
 ;)

Pages: 1 ... 10 11 [12] 13 14 ... 19